aazarsat.ir
08-03-2017, 20:18
آخرین ورژن نرم افزاری برنامهTSReader Version 2.8.49 برای کارتهای DVBبه تاریخ 3/8/2017
TSReader Version 2.8.49
Quote:
Changed in 2.8, build 49:
[*=center]All: Added source modules for the TBS 6902 DVB-S/S2 card
[*=center]Pro: Fixed a problem with SCTE-35 messages getting corrupted on networks with a weak and noisy signal.
[*=center]Pro: Added a network-wide monitoring program called TSWatcher. More details can be found here
[*=center]Std/Pro: Added an option to the -R switch (-Rt) to tell TSReader to split files in the number of seconds specified rather than the number of MB
[*=center]Pro: TSWatcher: Added support for monitoring DVB System Information PID rates
[*=center]Pro: TSWatcher: Added support for importing DVB-T/T2 and 8VSB multiplex lists
[*=center]Pro: TSWatcher: Added option to write alarms to a plain text file in the TSReader/TSWatcherLogs folder
[*=center]Pro: TSWatcher: Added alarm for a particular PID falling below a specified data rate
[*=center]Pro: TSWatcher: All alarm values can now be changed
[*=center]Pro: Added a forwarder module for TCP
[*=center]Std/Pro: An H.265 thumbnail decoder is now included with TSReader
[*=center]Pro: Added display of closed captions carried in H.265 video
[*=center]Pro: ccextract program also supports H.265 video
[*=center]All: UDP/RTP/HRTP source modules now show the source address of the stream
[*=center]All: Added support for SAT>IP DVB-C interfaces
[*=center]Pro: TSWatcher: Add alarm for checking the presence of listed PIDs
[*=center]Pro: Updated the ITW-9500 (DVB-T modulator) forwarder module to support more than one of these modulators at a time using different TSReader Profiles
[*=center]Pro: Added the ability to ignore SCTE-35 NULL CUE messages. This is toggled by right-clicking on any CUE elementary stream in the tree view. This does not affect logging of CUE messages - just their display
[*=center]All: Added support for Silicon Dust HDHomeRun ISDB-Tb models
[*=center]Pro: Changed the behavior of the Control Server's FORWARD ON command so that if a forwarder module has a setup dialog, this dialog is not displayed. This means before using this command, the forwarder must be run manually to set the parameters
[*=center]Pro: Updated the ITW-9500 code to use the latest manufacturer API
[*=center]Pro: Adds logging support for the upcoming TSBitCounter program
[*=center]Pro: Added LOG command to the control server. Sub-commands are TSBitCounter or SCTE35. TSBitCounter is then followed by either ON or OFF and SCTE35 is followed by either the filename to log to or OFF to disable
[*=center]Pro: Added support for the ITW-9517 low-cost ISDB-T modulator
[*=center]All: Added support for SMPTE 2022-4 to the RTP source modules. TSReader does not process any FEC included but it does handle the extra SMPTE 2022-4 data added to the MPEG-2 payload part of the RTP packets. If the sender is using the SMPTE 2022-4 packet counter mode, TSReader will re-generate the NULL packets discarded by the sender
[*=center]Pro: RTP and RTP with SMPTE 2022-4 modes added to the UDP mux forwarder
[*=center]All: Depreciated the D-VHS, Roku HD-1000 and XNS playback modules. These technologies and devices are all obsolete
[*=center]Lite: TSReader's window is now resizable
[*=center]Std: The thumbnail processor now runs multiple streams in parallel - this will make thumbnail decoding much faster on multiple program transport streams
[*=center]Pro: A one time per profile warning is now shown if the parallel thumbnail thread count is lower than recommended and can automatically fix this. Like the Standard version this speeds up thumbnail generation but is even faster in Pro
https://sat2hddd.site/ext/Wikivb/WikivbClassic/misc/paperclip.png فايل هاي پيوست شده
https://sat2hddd.site/ext/images/attach/rar.gif TSReaderLite2.8.49.rar (https://sat2hddd.site/ext/attachment.php?attachmentid=184848&d=1501750920) (34.82 مگابایت, 0 نمايش)
TSReader Version 2.8.49
Quote:
Changed in 2.8, build 49:
[*=center]All: Added source modules for the TBS 6902 DVB-S/S2 card
[*=center]Pro: Fixed a problem with SCTE-35 messages getting corrupted on networks with a weak and noisy signal.
[*=center]Pro: Added a network-wide monitoring program called TSWatcher. More details can be found here
[*=center]Std/Pro: Added an option to the -R switch (-Rt) to tell TSReader to split files in the number of seconds specified rather than the number of MB
[*=center]Pro: TSWatcher: Added support for monitoring DVB System Information PID rates
[*=center]Pro: TSWatcher: Added support for importing DVB-T/T2 and 8VSB multiplex lists
[*=center]Pro: TSWatcher: Added option to write alarms to a plain text file in the TSReader/TSWatcherLogs folder
[*=center]Pro: TSWatcher: Added alarm for a particular PID falling below a specified data rate
[*=center]Pro: TSWatcher: All alarm values can now be changed
[*=center]Pro: Added a forwarder module for TCP
[*=center]Std/Pro: An H.265 thumbnail decoder is now included with TSReader
[*=center]Pro: Added display of closed captions carried in H.265 video
[*=center]Pro: ccextract program also supports H.265 video
[*=center]All: UDP/RTP/HRTP source modules now show the source address of the stream
[*=center]All: Added support for SAT>IP DVB-C interfaces
[*=center]Pro: TSWatcher: Add alarm for checking the presence of listed PIDs
[*=center]Pro: Updated the ITW-9500 (DVB-T modulator) forwarder module to support more than one of these modulators at a time using different TSReader Profiles
[*=center]Pro: Added the ability to ignore SCTE-35 NULL CUE messages. This is toggled by right-clicking on any CUE elementary stream in the tree view. This does not affect logging of CUE messages - just their display
[*=center]All: Added support for Silicon Dust HDHomeRun ISDB-Tb models
[*=center]Pro: Changed the behavior of the Control Server's FORWARD ON command so that if a forwarder module has a setup dialog, this dialog is not displayed. This means before using this command, the forwarder must be run manually to set the parameters
[*=center]Pro: Updated the ITW-9500 code to use the latest manufacturer API
[*=center]Pro: Adds logging support for the upcoming TSBitCounter program
[*=center]Pro: Added LOG command to the control server. Sub-commands are TSBitCounter or SCTE35. TSBitCounter is then followed by either ON or OFF and SCTE35 is followed by either the filename to log to or OFF to disable
[*=center]Pro: Added support for the ITW-9517 low-cost ISDB-T modulator
[*=center]All: Added support for SMPTE 2022-4 to the RTP source modules. TSReader does not process any FEC included but it does handle the extra SMPTE 2022-4 data added to the MPEG-2 payload part of the RTP packets. If the sender is using the SMPTE 2022-4 packet counter mode, TSReader will re-generate the NULL packets discarded by the sender
[*=center]Pro: RTP and RTP with SMPTE 2022-4 modes added to the UDP mux forwarder
[*=center]All: Depreciated the D-VHS, Roku HD-1000 and XNS playback modules. These technologies and devices are all obsolete
[*=center]Lite: TSReader's window is now resizable
[*=center]Std: The thumbnail processor now runs multiple streams in parallel - this will make thumbnail decoding much faster on multiple program transport streams
[*=center]Pro: A one time per profile warning is now shown if the parallel thumbnail thread count is lower than recommended and can automatically fix this. Like the Standard version this speeds up thumbnail generation but is even faster in Pro
https://sat2hddd.site/ext/Wikivb/WikivbClassic/misc/paperclip.png فايل هاي پيوست شده
https://sat2hddd.site/ext/images/attach/rar.gif TSReaderLite2.8.49.rar (https://sat2hddd.site/ext/attachment.php?attachmentid=184848&d=1501750920) (34.82 مگابایت, 0 نمايش)