آموزش استفاده از ریموت کنترل دریمباکس مدل dm600

[aazarsat.ir]

آموزش استفاده از ریموت کنترل دریمباکس مدل DM600


http://wiki.openpli.org/images/wiki/000847_dm_rcu.jpghttp://wiki.openpli.org/images/wiki/000005_RC500-32.png

What difference do you see between these two remote?






[*=center]The difference in size

[*=center]The one of the left is for the DM600, DM7000, DM7020, DM7025, DM800
[*=center]The one of the right is for the DM500plus, DM56xx and the DM500 click here for more details
[*=center]The features and functions on the remote controls are different
[*=center]The remote on the left has a video or record button the DM500 does not
[*=center]The remote on the left as a different volume buttons to the DM500
[*=center]The remote on the left has bouquets buttons the DM500 does not






Daily use ...

Changing Channels


[*=center]DM500 (the remote on the right above)
[*=center]Use the up and down arrows keys to change the channel or press the OK button twice to see the channel list
[*=center]All other models (the remote on the left above)
[*=center]Use the up and down arrows or the left and right arrows to change the channel




Selecting the Channels Lists


[*=center]DM500 (the remote on the right above)
[*=center]press the OK button twice to see the channel list
[*=center]All other models (the remote on the left above)
[*=center]Use the up and down arrows




Selecting bouquets


[*=center]DM500 (the remote on the right above)
[*=center]Press the OK button twice to see the channel list and then the BLUE button to select the bouquets
[*=center]All other models (the remote on the left above)
[*=center]Use the bouquets button to select the bouquet you require




Changing the Volume


[*=center]DM500 (the remote on the right above)
[*=center]Use the left and right arrows keys to change the volume
[*=center]All other models (the remote on the left above)
[*=center]Use the volume buttons to change the volume




Recording


[*=center]DM500, DM56x0, DM500+ users see below
[*=center]DM7025, DM800 - press the RED button
[*=center]DM600, DM7000, DM7020 - press the VIDEO button






The Help button on all remote control units is your friend!
On the 7025, 800 & 8000 you have interactive help screens

http://wiki.openpli.org/images/wiki/000847_e2help.jpg


Here is a list of the functions on your remote control for all E1 boxes
(DM500, 56x0, 500+, 600, 7000, 7020).

http://wiki.openpli.org/images/wiki/000847_button1.png

http://wiki.openpli.org/images/wiki/000847_button2.png



Howto access the Video button with the small silver remote above prior to Jade2


The video menus give you access to the record button and several others as shown below.

1. From the TV screen press the OK button so you see the OSD popup like this example below

http://wiki.openpli.org/images/wiki/000847_500record1.png

2. Now press the Help button and the screen above will change to be like this;

http://wiki.openpli.org/images/wiki/000847_500record.png

3. To get more help press the help button again and these screen will provide you with all the commands

http://wiki.openpli.org/images/wiki/000847_video_h1.png

http://wiki.openpli.org/images/wiki/000847_video_h2.png


Tip: For this tip above to work you need to have the correct remote control unit defined in the Hardware setup section



Howto access the Video button with the small silver remote with the Jade2 software


The video menus give you access to the record button and several others as shown below. But
before we can do this you have to select the remote control you have on your DM500. To do this
you have to ( The howto is here )
1. Press the menu | setup | hardware | remote control selections
2. select silver remote


http://wiki.openpli.org/images/wiki/000847_500hardremote.jpg
3. Go to TV screen

4. From the TV screen press the OK button so you see the OSD popup like this example below


http://wiki.openpli.org/images/wiki/000847_500record1.png
5. Now press the Help button and the screen above will change to be like this;


http://wiki.openpli.org/images/wiki/000847_500record.png
6. To get more help press the help button again and these screen will provide you with all the commands


http://wiki.openpli.org/images/wiki/000847_video_h1.png

http://wiki.openpli.org/images/wiki/000847_video_h2.png

The VIDEO controls will NOT appear until you select the correct remote control (Silver)

WARNING: By making this selection of the silver remote your WEBIF remote may not work correctly

Tip: For this tip above to work you need to have the correct remote control unit defined in the Hardware setup section



http://wiki.openpli.org/images/wiki/000847_button.jpg
Tip: press the RED button to see the Electronic Programme Guide (EPG)
Tip: To assign new functions to your Yellow and Blue buttons, learn more about it here
Tip: The old blue button for softcams and downloads is still there but in a different layout click here to learn more
Tip: The old PPanels menu is now under the "yellow" button click here to learn more
Tip: a DM500+, DM600, DM7000, DM7020 remote will now work on your DM500 ..



Accessing the remote control function from your desktop


By Riad

Using the Windows operation system, I needed to send remote control
codes/presses via the LAN to control the Dreambox:

1. Download WGET for Windows and place it in C:\ (google is your friend)
2. Lunch a command prompt window (CMD) and type: C:\wget.exe –quiet –delete-after http://ipofyourdmbox/cgi-bin/rc?X
(where ipofyourdmbox might = 192.168.1.3)


By replacing X with the correct code number,
the wget command will send a remote control
key press/code to the Dreambox. The flag –quite will make the
command silent, and –delete-after will make wget not write any files to C:\

Here is a list of remote command codes:


116=Power
2=1
3=2
4=3
5=4
6=5
7=6
8=7
9=8
10=9
158=previous
11=0
159=next
115=volume up
113=mute
402=bouquet up
114=volume down
1=lame
403=bouquet down
358=info
103=up
141=dream
105=left
352=OK
106=right
392=audio
108=down
393=video
398=red
399=green
400=yellow
401=blue
385=tv
377=radio
66=text
138=help

The above method can be used in many situations, but the way I use it
is with IR Server Suite to control my Dreambox from a different room using Media Center PC.

You can view the DMM Remote Control Unit Code page document by clicking here.


Reprogramming the Large Silver Remote

By Ronnie

ATTENTION: executing this procedure is entirely at your own risk !!!

When you make a mistake when keying in the unlock code (9 - 8 - 2), your remote will no longer function, and you need a JTag interface to bring it back to live again!!

Under normal conditions you can only change the TV code defined for the TV button on your remote, and not the code defined for the DREAM button. This is because this is blocked, so the first thing to do is to unblock it. This is how that is done:

1) Press the DREAM button (top right on your remote).
2) Press the shift button (upper left), and keep it depressed until the DREAM button flashes twice.
3) Key in the following numbers: 9 - 8 - 2. DO NOT MAKE A MISTAKE!
4) When you have chance the channel from you remote you can lock it again, Key in the following numbers: 9 - 8 - 2, and the DREAM button flashes 1 time, and you remote is locked.

After this the DREAM button should flash 4 times. If it only flashes 2times, the procedure has failed, and you have to repeat it.

Now you can change the mode setting of the DREAM button on the remote. For example:

1) Press the DREAM button (top right on your remote).
2) Press the shift button (upper left), and keep it depressed until the DREAM button flashes twice.
3) Key in the following numbers: 0 - 0 - 3 - 1. This will change the mode setting to mode 1.

Alternatively, key in 0 - 0 - 3 - 2 for mode 2, 0 - 0 - 3 - 3 for mode 3, or 0 - 0 - 3 - 4 for mode 4.

After you have done this, the DREAM button should flash 2 times. If not, it hasn't worked because it hasn't been unlocked.